ProductName Cutting Depth Maximum (CDX) Corner Radius (RE) Cutting Width (CW) Order No. Price

GEPI 2.39-0.15 IC908 0.354" 0.006" 0.094" EH6403199 30.45 GEPI 2.50-0.20 IC908 0.354" 0.008" 0.098" EH6403203 31.25 GEPI 3.00-0.20 IC908 0.354" 0.008" 0.118" EH6403207 31.25 GEPI 3.00-1.50 IC908 0.197" 0.059" 0.118" EH6403209 32.65 GEPI 1.96-0.10 IC908 0.098" 0.004" 0.077" EH6403353 30.45 GEPI 2.00-0.10 IC908 0.354" 0.004" 0.079" EH6403357 30.45

Precision Inserts for Internal Grooving

Precision-ground Double-ended Internal grooving and turning in small diameters from .49" Low feeds Repeatability .001Grade chart on page IMC-2

ProductName Corner Radius (RE) Cutting Width (CW) Order No. Price

GIF 5.00E-0.40 IC20 0.016" 0.197" EH6400148 28.70

8949

GIF Precision Inserts for Ex- ternal Grooving

Precision-ground Double-ended F-type chipformer (E-Honed) GRIP SYSTEM Groove-Turn Multifunction Operations The Groove-Turn tools are multifunction tools, able to operate in a se- quence of grooving and turning modes. Moving from turning to grooving requires consideration of the basic Grip principle, thereby eliminating the possibility of insert breakage. In this situation one must release the side deflection which is necessary in turning, but not recommended in groov- ing. The following machining sequence is suggested: After completing the longitudinal turning, but before starting the grooving, the side deflection must be released. Move the tool in the direction opposite that of feed, approximately .004", and return to the original position without side load. Then, after the deflection has been released and the holder is perpendic- ular to the workpiece, the grooving operation may start.

ProductName Cutting Depth Maximum (CDX) Corner Radius (RE) Cutting Width (CW) Order No. Price

GIPI 1.57-0.15 IC20 0.098" 0.0059" 0.062" EH6401204 24.25 GIPI 2.39-1.20 IC20 0.252" 0.0472" 0.094" EH6401260 25.20

8950

GIPI Precision Inserts for Internal Turning and Grooving

Precision-ground Double-ended P-type chipformer Medium feeds Minimum bore: .787"

ProductName Corner Radius (RE) Cutting Width (CW) Order No. Price

GIPI 3.00E-0.40 IC20 0.016" 0.118" EH6401298 25.10

8951

GIPI Precision Inserts for Internal Turning and Grooving

Precision-ground Double-ended Medium feed P-type chipformer Minimum bore: .787" (E Honed)

ProductName Cutting Depth Maximum (CDX) Corner Radius (RE) Cutting Width (CW) Order No. Price

GEPI 2.00-1.00 IC908 0.197" 0.039" 0.079" EH6403363 31.65 GEPI 2.22-0.10 IC908 0.354" 0.004" 0.087" EH6403367 30.45 GEPI 2.39-0.10 IC528 0.354" 0.004" 0.094" EH6403369 30.45 GEPI 3.18-0.20 IC908 0.354" 0.008" 1/8" EH6403374 31.25 GEPI 3.18-1.59 IC908 0.197" 0.063" 1/8" EH6403376 32.65

9065

IMC-16